My new Acer Aspire One 753 arrived. Somewhat to my surprise the performance of it with Windows 7 was not great, so I shrunk the volume, and installed Fedora 15. This went quite smoothly, except for the installer wanting/needing internet access. As the built-in WIFI device isn't supported by GPL drivers, I needed to plug in a cable to complete the install.
I then set about getting wifi to work as follows -
Black list acer_wmi
echo blacklist acer_wmi > /etc/modprobe.d/blacklist-acer.conf
Install broadcom driver
rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm
rpm -Uvh http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
yum update
yum install kmod-wl
Fedora 15 is performing very well, and the new interface is nice.
Friday, July 8, 2011
Sunday, June 26, 2011
Microsoft tax
My original Acer Aspire One sadly died recently, so I decided to replace it with an Aspire One 753. I'm anticipating it's arrival. One of the reasons I bought the Aspire One originally was that it came with Linux installed. Unfortunately this is no longer an option (the Cromia isn't available here yet), so I began to investigate if it's possible to get a refund for Windows 7. The posts below show that it is -
Getting a Windows refund from Acer in the Netherlands
Windows tax refund for Acer notebook (Acer Aspire 1410/1810T)
but I don't have the patience to go through the difficult process. Whilst I'm not a Microsoft hater in general, their monopolistic practices have clearly left a legacy - and sadly this time they will be taking a cut from me.
Getting a Windows refund from Acer in the Netherlands
Windows tax refund for Acer notebook (Acer Aspire 1410/1810T)
but I don't have the patience to go through the difficult process. Whilst I'm not a Microsoft hater in general, their monopolistic practices have clearly left a legacy - and sadly this time they will be taking a cut from me.
Monday, June 6, 2011
Chrome unresponsive for gmail and yahoo mail on Fedora 14
Some time back I switched from Firefox to Chrome on my Aspire One (running Fedora 14). I was impressed by how fast it is, and became a convert. Unfortunately, after some time it became unusable, with gmail and many other pages leaving Chrome unresponsive.
I tried many workarounds and 'solutions', removing my cache and configuration directories but still no joy.
I then began troubleshooting with strace - and noticed that the problem went away. This lead me to some more googling, and I found this post -
Issue 77274: Chrome 11 hangs on linux due to gecko-mediaplayer
The solution was as simple as removing gecko-mediaplayer
$ sudo yum erase gecko-mediaplayer
I tried many workarounds and 'solutions', removing my cache and configuration directories but still no joy.
I then began troubleshooting with strace - and noticed that the problem went away. This lead me to some more googling, and I found this post -
Issue 77274: Chrome 11 hangs on linux due to gecko-mediaplayer
The solution was as simple as removing gecko-mediaplayer
$ sudo yum erase gecko-mediaplayer
Monday, April 11, 2011
D-LINK DHP-307AV Powerline AV
Although my apartment is wired with CAT-6, unfortunately where I have the TV and HTPC now, there is only one outlet. As my TV provided via IPTV, my set-top box needs it's only Ethernet feed from the 'triple-play' switch (XG6745). The HTPC needs a good connection to my NAS... so initially it got the CAT-6 connection, whilst I figured the IPTV could be sent over HomePlug AV.
So I bought this kit - D-LINK DHP-307AV.
Initially, I was very impressed - the setup was very smooth, just plug-in, and press a button on each unit... and my IPTV was up and running.
However, after a couple of days, my the TV would occasionally freeze, and break-up. After some resets, and moving outlets... the problem remained.
I then switched the TV back to Ethernet, and connected the HTPC over the powerline. Whilst it works fine.. the throughput was around 30Mbps - somewhat disappointing. I had hoped based on google research to be in the range 60-85Mbps.
Thursday, March 31, 2011
MCE Remote and LCD Display
Microsoft MCE Remote
sudo yum install lirc
yum install lirc-remotes
sudo yum install lcdproc
sudo yum install lirc
yum install lirc-remotes
cp /usr/share/lirc-remotes/mceusb/lircd.conf.mceusb /etc/lirc/lircd.conf
chkconfig lirc on
/etc/init.d/lirc restart
I'm unable to get the mouse working at this point. After lot of experimentation and googling, I'm not sure anyone has succeeded yet with Fedora.
LCD Display
sudo yum install lcdproc
cd /etc/sysconfig/lcdproc
cp LCDd.conf.example LCDd.conf
Edit LCDd.conf setting Driver=imonlcd
cp lcdproc.conf.example lcdproc.conf
chkconfig LCDd on
chkconfig lcdproc on
/etc/init.d/LCDd start
Wednesday, March 30, 2011
XBMC on Fedora 14 (HTPC)
I bought a new HTPC, in pieces -
Customisations so far -
Auto-login, and auto-start of XBMC -
http://www.perturb.org/display/GDM_AutoLogin.html
Installed NoMachine NX Server to allow easy remote management
Next to tackle -
- Microsoft MCE Keyboard/Remote
- Front panel display on the Antec Fusion case
- IPTV PVR
- 386482 - Antec Fusion HTPC Remote Black, Fans: 2x 120mm Sida, IR, Remote, LCD Display, iMon software
- 612433 - Corsair CX 500W PSUATX 12V V2.3, 80 Plus, Standard. 2x 6+2pin PCIe, 5x SATA, 120mm Fan
- 610540 - AMD Athlon II X3 450, Triple Core, 3.2Ghz, AM3, 1,5MB, 95W, Boxed
- 363359 - Crucial DDR3 1333MHz 4GB KIT, CL9, Kit w/two matched DDR3 2GB, 240pin
- 597747 - Gigabyte GA-880GMA-UD2H, Socket-AM3 mATX, AMD880G+SB850, DDR3, 2xPCIe(2.0)x16, VGA, DVI, HDMI, SATA 6Gb/s, USB 3.0
- 575186 - Western Digital Caviar® GreenPower™ 1TB Sata 3 Gb/s, 64MB Cache
- 582000 - Microsoft Wireless Optical Desktop 700V2 Black USB
- 508084 - HDMI Cable, 1m
- 493692 - Lite-On Blu-Ray Reader IHOS104-37, Blu-Ray DVD-ROM, Sata
Customisations so far -
Auto-login, and auto-start of XBMC -
http://www.perturb.org/display/GDM_AutoLogin.html
Installed NoMachine NX Server to allow easy remote management
Next to tackle -
- Microsoft MCE Keyboard/Remote
- Front panel display on the Antec Fusion case
- IPTV PVR
Saturday, February 5, 2011
Fedora 14 on Acer Aspire One A150L
Problem 1
Old livecd-tools from Fedora 8, for Linpus, seem to create a syslinux.cfg that isn't compatible with the version of grub (?) used on the FC14 live image.
Result was this message at boot -
syntax error in syslinux.cfg
Work-around - use Windows based liveusb-creator.
Problem 2
During boot of Fedora from live usb image, the message below appears -
no root device found.
booting has failed, sleeping forever.
The problem in my case was the volume name of the USB drive (FAT32). The label had a space character in it ('P1I CARD'), which the liveusb-creator mapped in syslinux.cfg as 'P1I_CARD'.
I was able to resolve this by renaming the volume to 'USBDISK', and replacing all instances of 'P1I_CARD' in syslinux.cfg.
Install to hard disk
Having booted the live usb image, I used gparted to reduce the size of the linpus partition, and free up space for Fedora.
Next was to install Fedora into the free space and boot into Fedora.
I then copied lines from the linpus grub.conf into the new fedora grub.conf, such that I could dual boot.
This went smoothly, and Fedora is performing exceptionally well... just wish I'd made the upgrade sooner.
Old livecd-tools from Fedora 8, for Linpus, seem to create a syslinux.cfg that isn't compatible with the version of grub (?) used on the FC14 live image.
Result was this message at boot -
syntax error in syslinux.cfg
Work-around - use Windows based liveusb-creator.
Problem 2
During boot of Fedora from live usb image, the message below appears -
no root device found.
booting has failed, sleeping forever.
The problem in my case was the volume name of the USB drive (FAT32). The label had a space character in it ('P1I CARD'), which the liveusb-creator mapped in syslinux.cfg as 'P1I_CARD'.
I was able to resolve this by renaming the volume to 'USBDISK', and replacing all instances of 'P1I_CARD' in syslinux.cfg.
Install to hard disk
Having booted the live usb image, I used gparted to reduce the size of the linpus partition, and free up space for Fedora.
Next was to install Fedora into the free space and boot into Fedora.
I then copied lines from the linpus grub.conf into the new fedora grub.conf, such that I could dual boot.
This went smoothly, and Fedora is performing exceptionally well... just wish I'd made the upgrade sooner.
Subscribe to:
Posts (Atom)